Custom Glass Installation
in Bloor West Village.

Frameless showers from $850 · enclosures from $1,600 Office partitions from $1,200.

Glass work here is led by frameless shower enclosure rebuilds inside re-worked ensuites, interior glass railings on rebuilt stairs, and vanity mirrors. Every install carries our 5-year warranty on labour and 5-year warranty on hardware.

What Bloor West Village homes ask of glass

The Bloor West Village housing stock reads as 1910 through 1935 west-end Toronto — typically 1,700 to 2,800 sq ft on lots 25 to 35 feet wide, two and three storeys, with original brick exteriors and a meaningful share of original interior wood trim preserved through renovation cycles. Post-renovation ensuite footprints run 7 to 12 square metres. Second-floor ceilings sit at 2.5 to 2.7 metres on most homes.

Major streets in the neighbourhood include Bloor Street West as the central commercial spine, Runnymede Road along the east, Jane Street along the west, Annette Street as the main collector to the north, and Beresford Avenue and Willard Avenue as interior residential streets. The Bloor West Village BIA defines the commercial character along Bloor between Runnymede and Jane and brings in occasional partition work on retail fit-outs above the storefronts.

The glass work pattern tracks renovation type. Full-gut rebuilds include a new primary ensuite plus a new main-stair railing. Mid-cycle renovations are typically single-ensuite re-glass jobs on the original second floor. The pocket sits within easy reach of the Etobicoke boundary at the Humber River, so we also handle a meaningful share of work eastward from Old Mill and The Kingsway, treating it as one corridor.

Frameless shower enclosures in Bloor West Village

The Bloor West Village primary ensuite shower zone is typically 1.0 to 1.5 metres long. Frameless shower glass is most often a two- or three-panel arrangement with 10 mm tempered as the standard. We move to 12 mm where a fixed panel exceeds 1.1 metres unsupported, which is common on post-renovation footprints. Panel heights are 2.1 to 2.4 metres.

Templating in Bloor West Village often involves original brick party walls on the semi-detached homes and original lath-and-plaster on the others. The lag substrate switches between adjacent panels on many ensuites, and we template every clip on site.

Glass railings in Bloor West Village

Interior stair railings are a steady category. The original wood-spindle balustrades on the 1910s through 1930s homes are commonly replaced during a renovation, and a frameless or top-railed glass guard is the typical current spec. The open stair run is usually 3 to 4 metres on the main flight, with an upper-hall guard of 2 to 4 metres. Base shoe anchored to the stringer is the standard. On older stringers undersized for the load, we add a continuous steel sub-rail.

Exterior rear-deck guards are a smaller but steady category. Rear yards in Bloor West Village are deeper than the Roncesvalles norm, and wind load is the standard residential default.

Custom mirrors in Bloor West Village

Vanity mirrors in Bloor West Village ensuites are wide — typically 1.5 to 2.2 metres of continuous mirror across renovated cabinet runs. We cut to the wall, polish all edges, and back-mount with adhesive and concealed clips. Ground-floor powder rooms in the heritage homes often retain original cabinet widths, and the mirror work sizes accordingly.

Why a recent install in Bloor West Village matters

A recent install on a Beresford Avenue home was a primary ensuite re-glass on a 1922 build that had been renovated in 2023. The shower zone was 1.3 metres long with a fixed panel 1.15 metres wide unsupported, putting us at 12 mm tempered. The detail worth noting was the radiator footprint adjacent to the wet zone — an original cast-iron rad had been kept and re-installed against the wall the fixed panel needed to meet. We templated the panel with a 12 mm setback at the corner closest to the radiator so the panel didn't trap heat against the silicone bead, and we used a high-temperature silicone formula at that corner. The panel reads flush; the rad runs without baking the glass seal. Heritage homes often keep original mechanical that modern showers weren't designed around. Templating catches that.

Areas we also serve nearby

• High Park — south along Parkside
• Roncesvalles — south-east
• Swansea — south, lakeside
• Baby Point — west toward the Humber
• Old Mill and The Kingsway, Etobicoke — west across the Humber (frameless showers in Etobicoke)
• Glass installation in Toronto
• Frameless showers in Toronto
• Glass railings in Toronto
• Custom mirrors in Toronto