Frameless Shower Enclosures in Toronto — Custom Installations Across the City & GTA
A frameless shower enclosure is the single most effective way to open up a bathroom, turning a functional space into a clean, modern ensuite. At Lux Glass, we have been installing custom frameless shower enclosures in Toronto for 18 years. From heritage homes in Cabbagetown, Rosedale and Riverdale to high-rise condos in the downtown core and family ensuites across North York, Etobicoke and Scarborough, our projects are built to last. We measure to the exact millimetre and use premium-grade tempered glass with high-quality brass hardware to ensure your shower door swings smoothly and seals tightly for years to come.
Recent frameless shower projects near Toronto
Real installs by Lux Glass — owner-measured and installed across Toronto and the GTA.
What “frameless” actually means on a Toronto job site
Unlike standard framed or semi-frameless doors from big-box stores, a true frameless shower enclosure uses no metal framing along the top or edges of the glass. The panels are structural—typically 10 mm (3/8″) or 12 mm (1/2″) heavy tempered glass—mounted directly to your tile and walls using solid brass hinges and small, discrete clamps. This design eliminates the visual clutter of aluminum framing, prevents water and soap scum from pooling in metal tracks, and creates a seamless transition that highlights your premium tile, marble, or stone work.
Because the glass itself does the structural work, a frameless install is less forgiving than a framed one. There is no frame to hide a wall that is 6 mm out of plumb or a curb that slopes the wrong way. That is why we template every Toronto job after the tile is set, and why we coordinate with your tile contractor on blocking and curb slope before the first tile goes up.
Shower-door configurations we install in Toronto
- Hinged shower doors (the standard): A single swing door mounted either directly to the wall or to an adjacent fixed glass panel. Sized and balanced to your specific opening.
- Corner enclosures (door + return panels): Ideal for corner layouts, combining a door panel with one or more return glass panels to enclose a custom curbless or curbed base.
- Walk-in / curbless screens (no door): A minimalist design using a single, stationary glass panel to partition the shower area, leaving an open walkthrough. Extremely popular in modern curbless remodels.
- Sliding (bypass) doors: For tub decks and alcoves with no room for a door swing. Frameless sliders run on a top-mounted bar with no bottom track to collect grime.
- Steam-rated enclosures: Sealed to the ceiling or fitted with an operable transom so the steam generator can do its job. These always run 12 mm glass.
10 mm vs 12 mm: the glass spec, explained
Most Toronto enclosures use 10 mm (3/8″) tempered glass; we step up to 12 mm (1/2″) for oversize panels, ceiling-height and steam showers, and long unsupported spans. All glass is tempered safety glass certified to CAN/CGSB-12.1 — see our frameless shower guide for the full glass spec.
Hardware that carries the weight
Doors hang on solid forged brass hinges and clamps, not cast zinc, in matte black, brushed nickel, polished chrome or brushed brass. Clear seals close the gaps at the strike and sill, and there is no metal track at the floor.
From measurement to install: the realistic timeline
Every project follows the same sequence. From final template to finished shower, plan on two to three weeks:
- On-site consultation (week 0): We visit your Toronto home to assess the space, discuss layouts and hardware, and verify structural framing behind your tile. You receive an itemized written quote within 48 hours—a fixed price, not an estimate.
- Laser-precision template (after tile is set): Once your tile is completely finished, we measure the opening down to the millimetre. We never measure off rough openings, because even a 1 mm discrepancy shows up as a leak or a door that drifts open.
- Fabrication and tempering (7–10 business days): Your glass is custom-cut, notched for hinges, edge-polished, and tempered. This is the longest stage and it cannot be rushed—tempering is a one-way process.
- Installation (a single visit, usually under half a day): Our own crew handles the entire install—no subcontractors, fully insured. Silicone cures overnight; the shower is ready to use the next day.
Curbless showers and contractor coordination
Half the frameless work we quote in Toronto right now is curbless—a level, fully waterproofed floor with a single glass screen and no threshold to step over. A curbless install lives or dies on what happens before we arrive: the floor slope, the waterproofing membrane, and the wood blocking behind the tile where our hinges and clamps will land. So we talk to your general contractor or tile setter before tile goes up. We confirm blocking locations, agree on channel placement if the design calls for a recessed glass channel in the floor, and check that the curb (if there is one) is sloped inward so water drains back into the shower instead of along the glass line. None of this costs you anything extra—it is ten minutes on the phone that prevents the two most common shower-glass failures we get called to fix: doors anchored into tile with nothing behind it, and water tracking out along a flat curb.
Condo shower installs in Toronto
Condo work in Toronto runs on building rules. We give property management a certificate of insurance — Lux Glass Inc. is WSIB insured and carries $5,000,000 Commercial General Liability (CGL) — book the service elevator with the building, and confirm every panel size against the elevator and stairwell before fabrication. The most common condo call is replacing a leaking framed unit with a frameless door on the existing base; single frameless shower doors start from $850 installed. If your existing door only needs adjusting or new seals, see shower door repair in Toronto.
Where we work in Toronto
Much of our downtown and midtown shower work is in heritage homes — Cabbagetown, Rosedale, Riverdale and The Beaches — where walls are rarely plumb, space is tight, and every panel is a custom cut. These are the jobs where templating after tile earns its keep: we scribe the glass to the wall as it actually is, not as the drawing says it should be.
In the suburbs the work changes character. North York, Etobicoke and Scarborough ensuites tend toward large multi-panel enclosures—12 mm glass, double doors, notch cuts around benches and shampoo niches. Across midtown — Leaside, Davisville and Lawrence Park — we do a steady run of family-ensuite renovations where durability and easy cleaning drive the spec, and in the downtown condo towers the most common call is replacing a leaking builder-grade framed unit with a frameless door on the existing base—often the highest-impact, lowest-disruption upgrade a 15-year-old bathroom can get. If the tile and base are sound, a replacement like that needs no demolition at all: we remove the old framed unit, clean up the silicone lines, template, and hang new glass on the existing opening.
What a Toronto frameless enclosure costs
At Lux Glass, homeowners get direct owner-operator pricing with no retail markup. Custom frameless glass showers in Toronto start from $38 per sq. ft. installed for 10mm heavy tempered safety glass. A single frameless shower door starts from $850 installed, and complete custom frameless shower enclosures start from $1,600 installed. Total investment reflects opening dimensions, glass spec (10mm vs 12mm or Starphire low-iron), and hardware finish. Every quote includes on-site laser templating, solid forged brass hardware, professional installation, and our 5-year warranty on labour and 5-year warranty on hardware.
Standard clear or low-iron glass
Standard tempered glass has a faint green tint, most visible at the edges. Against white marble or pale stone, some clients want it gone—that is what low-iron (Starphire) glass is for. We bring both samples to your consultation so you can judge against your actual finishes rather than a showroom wall. For the full breakdown of where low-iron is worth it and where it is not, see our low-iron glass guide.
Toronto frameless shower FAQs
How much does a frameless shower enclosure cost in Toronto?
Custom frameless showers in Toronto start from $38 per sq. ft. installed. A single frameless shower door starts from $850 installed, and complete multi-panel enclosures start from $1,600 installed, backed by a 5-year warranty on labour and 5-year warranty on hardware. We give a fixed, itemized written price after a free in-home consultation—no per-piece games and no surprise extras.
How long does it take from quote to installed shower?
Plan on two to three weeks from final template. We template after your tile is fully set, fabrication and tempering take 7–10 business days, and installation is a single visit, usually under half a day. The shower is ready to use the next morning once the silicone cures.
Should I choose 10 mm or 12 mm glass?
10 mm (3/8″) tempered is the right spec for most enclosures—doors, inline panels, and walk-in screens. We move to 12 mm (1/2″) for oversize panels, ceiling-height installs, steam showers, and long spans that need the extra stiffness. We will tell you plainly which one your layout needs; thicker is not automatically better.
What is the difference between frameless and semi-frameless?
Semi-frameless doors keep metal framing on some edges and use thinner, lighter glass that needs the frame for support. Frameless enclosures use heavy structural glass with no perimeter metal at all—just hinges and clamps. Frameless costs more, but it is easier to clean, seals better over time, and does not trap water in tracks where framed units eventually corrode and leak.
Can a frameless enclosure work in a small bathroom?
Often better than anything else. A clear glass panel keeps a small bathroom reading as one open space instead of chopping it in half with a curtain or framed unit. Where there is no room for a door swing, we use a fixed walk-in screen or a frameless bypass slider. Hinged doors can also be set to open outward and inward, which solves most tight layouts.
How do I keep frameless shower glass clean?
A quick pass with a squeegee after each use is 90% of it—there are no metal tracks to scrub. We also offer a permanent glass protection coating (DFI) applied before installation that seals the glass pores and repels hard water, soap scum, and limescale.
Do you install in Toronto condos?
Yes, regularly—including the high-rise towers downtown and in CityPlace, Liberty Village and Yorkville. We handle the building logistics: certificate of insurance for property management, elevator booking, and panel sizes confirmed against elevator and stairwell dimensions before fabrication. The install itself is quiet, dust-free work that fits standard condo work-hour windows.
Get a free quote for your project
Ready to upgrade your bathroom? Call Bojan at 416-897-0767 or email [email protected] to book your free in-home consultation. All installations are completed by our own expert in-house team with a 5-year warranty on labour and 5-year warranty on hardware.
We also install glass railings in Toronto and custom mirrors in Toronto.