Glass Backsplash
in Milton.

Bojan Stojic, our owner and master glazier, measures every Milton job himself and oversees every installation. For the full service overview, see our main glass backsplash page.

Upgrading the backsplash the builder installed

Most Milton homes we work in were built between 2005 and 2020. If your kitchen still has the tile the builder put in, glass is a clean replacement: no grout lines, one continuous surface, and a colour you picked rather than one that came with the house. Milton's newer housing is consistent, which makes planning predictable, but every kitchen is still templated on site. If the countertops are being upgraded too, that changes when we measure, as explained below.

Three kinds of backsplash glass

• Back-painted colour. The paint is on the back of the panel, so you see a solid colour through smooth glass. It is the easiest option to coordinate with cabinets.
• Low-iron white. Ordinary glass has a green cast that turns white paint slightly minty. Low-iron glass removes most of it, so white, ivory and pale grey stay true.
• Mirror. Reflects light and makes a smaller kitchen feel bigger, at the cost of showing more water spots and reflecting whatever is on the counter.

How a Milton backsplash job runs

1. Site measure. We look at the wall, the outlets and switches, the range and the counters, and talk through colour and glass type.
2. Written quote. You get a written price based on that measure before anything is ordered.
3. Template. Once the countertops are installed and the electrical boxes are final, we template the wall exactly, including every opening.
4. Fabrication. The glass is cut to the template, the cutouts are made, the colour is applied, and the panel behind the range is tempered.
5. Install. Bojan sets the panels and checks every joint and opening before he leaves.

Cutouts for outlets and switches

Every outlet and switch on the backsplash wall needs its own opening in the glass. We locate each one on the template, and on tempered panels the openings are made before tempering, because tempered glass cannot be cut or drilled afterwards. If an electrician is moving or adding outlets, that work has to be finished before the template. A box moved after the glass is made will not line up with its cutout.

Pairing the glass with your cabinets

If the cabinets are staying, take the glass colour from a cabinet door held against the countertop, not from memory. If you are refacing or painting the cabinets, choose the cabinet colour first and the glass second, because the glass is easier to tune to the cabinets than the other way round. Matching exactly gives a seamless, built-in look. A deeper shade of the same colour adds depth, and a colour pulled from the countertop ties the two surfaces together.

Old Milton is a different job

The original town core west of Ontario Street, around Mill Street and Main, has heritage houses where walls are more often out of plumb and ceilings are often lower than in the subdivisions. We measure to the wall as built, plan the panel edges around what the house actually gives us, and tell you at the measure if anything needs correcting before glass can go up.

What a glass backsplash costs in Milton

Kitchen glass backsplash projects start from a $1,200 minimum job. The total depends on the length of the run, the number of panels, how many cutouts it needs, and whether you choose low-iron glass, mirror or a standard back-painted colour. The written quote lists what is included, so you can compare options before deciding.

Get a quote for your Milton kitchen glass backsplash

Send the neighbourhood, a photo of the wall, the rough length of the run and whether new countertops are coming. Request a quote through our contact page or call 416-897-0767. More on our Milton glass work, Old Milton, low-iron Starphire glass and our main glass backsplash service.