
Vanity mirrors
Cut to the vanity wall, frameless or bevelled.
Lux Glass cuts and installs custom mirrors for Hamilton homeowners, from Victorian houses in Durand to family homes in Ancaster and Stoney Creek. We make vanity mirrors to size, LED backlit and antique mirrors, full-wall mirrors for basement gyms, and closet and door mirrors, and we fit them to walls that are rarely as straight as a drawing suggests.
★★★★★ 5.0 Google Rating
Get a Free Quote
Lux Glass is based in Oakville and serves Hamilton from there. Master glazier Bojan Stojic measures each mirror himself and oversees its installation. The full range is on our custom mirror service page.
The escarpment splits Hamilton into the Lower City and the Upper City, and the housing changes with it. The Lower City core around Durand is Victorian, Dundas is a heritage village under the escarpment brow, and Westdale, next to McMaster University, is mid-century brick and post-war infill. Century-old houses often come with out-of-plumb walls, uneven floors, and framing that has settled. That matters more for a mirror than for almost anything else in a bathroom, because a mirror shows every bow and dip in the wall behind it. Most of the planning on a Hamilton mirror goes into the wall before any glass is cut.
On an older Hamilton wall we work in this order:
Ancaster sits on top of the escarpment with larger family homes and estate pockets, while Stoney Creek in the east end mixes suburban subdivisions with lakefront properties. In homes like these a basement gym is a natural fit, and a mirror wall is what makes it work for checking form. A long wall is built from several panels butted with tight seams, and each panel is sized to pass the basement stair turn. The bottom edge is set high enough to clear the baseboard and dropped weights while still showing your feet. Exposed edges are flat polished so nothing catches a hand.

Cut to the vanity wall, frameless or bevelled.

A thin black frame for halls, entries and powder rooms.

Floor-to-ceiling mirror that makes a room read larger.
All services in every city we serve. Measured on site, quoted in writing.
01 · ShowersWalk-ins, hinged doors and full enclosures in low-iron glass. Hidden hardware, perfect seals.
Explore →
02 · PartitionsFull-height glass walls, sliding partitions and entrance doors — light without losing privacy.
Explore →
03 · Office DoorsGlass doors that slide, glass walls that open up or fold away, and glass that turns private at a switch.
Explore →
04 · SystemsEvery sliding door, movable wall, office front and entrance door we install, drawn so you can see how it moves.
Explore →
05 · RailingStandoff and channel balustrades for stairs, terraces and balconies — engineered, tempered, to code.
Explore →
06 · AluminumPicket, scroll, framed glass and glass railing, plus gates and privacy panels.
Explore →
07 · MirrorsBack-lit mirrors, full walls and custom shapes — cut, polished and mounted flush.
Explore →
08 · BacksplashSeamless back-painted glass for kitchens and baths — one panel, no grout lines, any colour.
Explore →
09 · Tables & ShelvesCustom-cut tops, counters and floating shelves — measured, polished, delivered.
Explore →
10 · ProtectionCoatings that keep glass spotless for years — easier cleaning, no etching, no water stains.
Explore →
11 · StorefrontsAluminum storefront framing, glazing and entrance packages for retail, office and mixed-use fit-outs, built to spec and on schedule.
Explore →Smaller original bathrooms in Durand and Dundas leave little room around the fixtures. Cutouts let a mirror pass around an outlet, a switch, or a sconce instead of stopping short of it, and every opening is located from the template taken on site. For the edge, a bevel often suits Victorian and Edwardian trim, while a flat polished edge suits a full modern renovation. In a tight room, one clean piece running wall to wall also makes the space read larger.
Custom mirrors start from $28/sqft, and full-wall gym mirrors are priced the same way. On older Hamilton houses the wall itself is often the biggest variable: a flat wall needs no preparation, while a bowed one needs packing or furring first. The other drivers are size, the number of panels, the edge profile, cutouts, and any LED or antique finish. After the site measure you receive a fixed, itemized written quote, before HST, so the price is settled before anything is cut.
On an older house, the measurement and the install are tied together. The person who checks the wall at the site measure is the one who knows where the plaster dips and how the piece was squared to the room. At Lux Glass that is one person: Bojan Stojic, master glazier, 18 years of experience, in business since 2008. The work runs site measure, written quote, template, fabrication, and install, all overseen by Bojan, with no hand-off to an outside crew. Lux Glass is WSIB insured, carries $5,000,000 Commercial General Liability, and every install carries our 5-year warranty on labour and 5-year warranty on hardware.
Send a photo of the wall, its rough width and height, and a note on the house, and we will quote the mirror in writing after a site measure. Request a quote through our contact page or call 416-897-0767. Read more about mounting a mirror on an uneven wall, see our main custom mirrors page, or browse all of our Hamilton glass services.
Yes, if the plaster is sound. We check for soft or loose areas and for flatness at the site measure. The weight is carried on a bottom channel or clips rather than on adhesive alone, and solvent-free mirror mastic holds the face.
It will if nothing is done about it, because a mirror copies the surface behind it. We mark the high and low spots, pack or shim the low ones, and fur out a badly bowed wall so the reflection stays straight.
High enough to clear the baseboard and keep the bottom edge away from dropped weights, but low enough to show your feet in a squat. We set the height to your room and equipment at the site measure.
Yes. A long wall is built from several panels, and each one is sized to pass the stair turn and the doorway. The panels are butted together with tight seams, so the reflection runs across with only a hairline between them.
Yes. Lux Glass is based in Oakville and serves Hamilton neighbourhoods including Westdale, Dundas, Ancaster, Durand, and Stoney Creek. Every quote starts with a site measure at your home.
Yes. Openings for outlets, switches, and sconces are located from the template taken on site and cut into the glass, so the mirror sits flush around them.
Yes, as long as power can be brought to the spot the mirror will cover. That wiring is done by your electrician before we template, and we size the mirror and its mounting around the supply.
Get a fixed, written quote from the owner -- no pressure, no call centre.
Get a free quote