Glass Door & Wall Systems | Lux Glass

Glass Door
& Wall Systems

Every sliding door, movable wall, office front and entrance door we install, drawn so you can see how it moves. We install the systems of C.R. Laurence and TAG Hardware, chosen on site for your opening and ceiling.

★★★★★  5.0 Google Rating

Get a Free Quote

Call 416-897-0767

Just your name and number — we handle the rest. Have sizes or photos? Use the full quote form.

Sliding doors

Sliding glass doors.

Top-hung and bottom-rolling sliders for office fronts, meeting rooms and homes. Each drawing shows the elevation, the header or track detail and the plan view.

ELEVATIONSingle sliding doorWALLHEADER SECTION1 track, one per panel1 000 mm opening2 400 mmPLAN VIEWLUX GLASS

Single sliding door

One glass door on a top track that slides along the wall instead of swinging into the room.

Typical use: Office fronts, meeting rooms and home offices where a swing door gets in the way.

Systems: CRL 690 Series · CRL70 Series · CRL285 Series · CRL EZ-Slide 80 · TAG EZ Sliding System (SLEZ80 / SLEZ120)

Request a quote →
ELEVATIONSliding door with fixed sidelite and Soft-BrakeFIXEDHEADER SECTION2 tracks, one per panelSOFT-BRAKE2 000 mm opening2 400 mmPLAN VIEWLUX GLASS

Sliding door with fixed sidelite and Soft-Brake

One sliding door and one fixed glass panel on the same header. A damper in the track slows the door at the end of its travel and draws it shut.

Typical use: Meeting rooms and private offices where the door should close quietly on its own.

Systems: CRL 695 Series (Soft-Brake) · CRL50/51 Series · TAG EZ Sliding System with fixed panel (SLEZ80/120 SF)

Request a quote →
ELEVATIONBi-parting sliding doorsWALLWALLHEADER SECTION1 track, both doors2 400 mm opening2 400 mmPLAN VIEWLUX GLASS

Bi-parting sliding doors

Two glass doors that open from the centre and park against the wall or a fixed panel on each side.

Typical use: Centre entrances, boardroom fronts and wide room dividers.

Systems: CRL 690/695 Series bi-parting kits · TAG EZ Sliding System double (SLEZ80/120 DS) · TAG LAG Sliding Kit Set B (wall-mount bi-parting)

Request a quote →
ELEVATIONBar sliding kit, wall or glass mountWALLBAR SECTIONroller rides on the barwall or glass brackets1 000 mm opening2 400 mmPLAN VIEWLUX GLASS

Bar sliding kit, wall or glass mount

A round stainless bar above the opening carries the door on two rollers. The bar fixes to the wall, or to a fixed glass panel for an all-glass look.

Typical use: Offices and homes that want visible, minimal hardware instead of a header.

Systems: CRL Laguna Series (LSWM5 wall mount, LSGM glass mount) · TAG LAG Sliding Kit Set A (wall-mount single) and Set C (glass-mount single)

Request a quote →
ELEVATIONExposed-roller sliding doorWALLROLLER DETAILring rolls on a flat barbar on standoff brackets1 000 mm opening2 400 mmPLAN VIEWLUX GLASSExposed hardware in black or brushed stainless

Exposed-roller sliding door

A flat steel bar and two large exposed wheels carry the door. Hardware that is meant to be seen, in black or brushed stainless.

Typical use: Loft offices, home offices, bathrooms and feature doors in restaurants and shops.

Systems: CRL Latitude 34 Collection: Solstice, Meridian and Hemisphere

Request a quote →
ELEVATIONBottom-rolling sliding doorsFIXEDFIXEDFLOOR TRACK2 tracks, one per pairweight on floor rollers4 800 mm opening2 400 mmPLAN VIEWLUX GLASSWeight on the floor track, the top channel only guides

Bottom-rolling sliding doors

The door weight runs on rollers in a floor track, with a guide channel at the top. Suits openings where the ceiling cannot carry a header.

Typical use: Shopfronts, lobbies and openings under weak or finished ceilings.

Systems: CRL SDR bottom-rolling entrance system (XX) · CRL SSR bottom-rolling system (OXXO)

Request a quote →
Movable walls

Telescopic, folding and stacking walls.

Glass walls that slide together, fold away or park in a bay, so one room becomes two and back again.

ELEVATIONTelescopic 1+2, single slidingFIXEDHEADER SECTION3 tracks, one per panel3 600 mm opening2 400 mmPLAN VIEWLUX GLASS

Telescopic 1+2, single sliding

One fixed panel and two sliding panels on parallel tracks. The sliding panels stack behind the fixed one.

Typical use: Room dividers, home offices, meeting rooms with a medium-width opening.

Systems: TAG SLTEL1+2SIN

Request a quote →
ELEVATIONTelescopic 1+3, single slidingFIXEDHEADER SECTION4 tracks, one per panel4 800 mm opening2 400 mmPLAN VIEWLUX GLASS

Telescopic 1+3, single sliding

One fixed panel and three sliding panels. More panels means more of the wall opens.

Typical use: Wide openings: boardrooms, open-plan offices, living-room dividers.

Systems: TAG SLTEL1+3SIN

Request a quote →
ELEVATIONTelescopic 1+2, double (bi-parting)FIXEDFIXEDHEADER SECTION3 tracks, one per panel6 000 mm opening2 400 mmPLAN VIEWLUX GLASS

Telescopic 1+2, double (bi-parting)

Two telescopic sets that open from the centre, each stacking behind its own fixed panel.

Typical use: Centre entrances and wide boardroom fronts where both sides should open.

Systems: TAG SLTEL1+2DBL · TAG SLTEL1+3DBL

Request a quote →
ELEVATIONTelescopic, concealed trackTRACK RECESSED IN CEILINGFIXEDHEADER SECTION3 tracks, one per panelset into the ceiling3 600 mm opening2 400 mmPLAN VIEWLUX GLASS

Telescopic, concealed track

The same telescopic action with the track recessed into the ceiling, so only glass is visible.

Typical use: Executive offices and minimal interiors, planned before the ceiling is finished.

Systems: TAG SLTEL1+2SINCON · SLTEL1+2DBLCON · SLTEL1+3SINCON · SLTEL1+3DBLCON

Request a quote →
ELEVATIONFolding (bi-fold) glass wallHEADER SECTION1 track, one per panel4 200 mm opening2 400 mmPLAN VIEWTOP TRACKcarrier in trackhingeLUX GLASS

Folding (bi-fold) glass wall

Hinged glass panels that fold against each other and gather at one side of the opening.

Typical use: Opening a whole wall, joining two rooms, patios and event spaces.

Systems: CRL OT Overhead Track bi-fold · CRL Birmingham Series (top-hung, patch roller)

Request a quote →
ELEVATIONStacking movable wallPARKING BAYHEADER SECTION1 track, one per panel3 600 mm opening2 400 mmPLAN VIEWCEILING TRACKPARKING BAYLUX GLASS

Stacking movable wall

Separate glass panels that each move along a ceiling track and park in a stack beside the opening.

Typical use: Training rooms, studios and flexible spaces that change layout often.

Systems: CRL SPS Stacking Partition System

Request a quote →
ELEVATIONFramed folding and sliding wall, exteriorEXTERIORPANEL SECTIONthermally broken frameinsulated glass unit4 800 mm opening2 400 mmPLAN VIEWTOP TRACKcarrier in trackhingeLUX GLASS4 panels fold to one side

Framed folding and sliding wall, exterior

Thermally broken aluminum frames with insulated glass. The panels fold to one side or slide and stack, so a living room or restaurant opens to the patio.

Typical use: Patios, decks, rooftop bars and restaurant fronts in the GTA climate.

Systems: CRL Monterey S80 bi-folding glass wall · CRL Palisades S90 bi-fold and S100 sliding

Request a quote →
Office fronts

Glass partitions and office fronts.

Fixed glass walls with a door, frameless or in a slim frame, with the acoustic rating the room needs.

ELEVATIONFrameless partition with swing doorFIXEDFIXEDFIXEDCHANNEL DETAILglass set in U-channeltop + bottom, no header4 000 mm opening2 400 mmPLAN VIEWLUX GLASS900 mm swing door on patch fittings

Frameless partition with swing door

Fixed glass panels set in a slim top and bottom channel, with a full-glass swing door on patch fittings or a pivot. No vertical frames.

Typical use: Meeting rooms, private offices and reception fronts where the glass should disappear.

Systems: CRL Klarity freestanding partition · CRL U-channel systems (dry and wet glaze) · doors on CRL PHA1 / PHE1 patch kits, hydraulic patch sets or Laguna pivot

Request a quote →
ELEVATIONFramed office front with door frameFRAME SECTIONglass in gasket seatsingle or insulated4 000 mm opening2 400 mmPLAN VIEWLUX GLASS900 mm swing door with overhead closer

Framed office front with door frame

Glass set in a slim aluminum frame with a matching door frame, in a single-glazed or an insulated, acoustic version.

Typical use: Office floors that need a rated partition, a closer and a proper door frame.

Systems: CRL OfficeFront 487 Series · CRL Fallbrook · CRL Fallbrook XL (acoustic, insulated sidelites)

Request a quote →
Entrance doors

Frameless entrance doors: rails, patches and closers.

All-glass swing doors for lobbies, shops and offices, hung on rails or patch fittings, with the closer chosen for the traffic.

ELEVATIONDoor-rail swing doorFIXEDFIXEDRAIL SECTIONbottom rail with pivot4 in. or 10 in. ADA rail3 000 mm opening2 400 mmPLAN VIEWFLOOR CLOSERLUX GLASSdoor 1 000 mm, sidelites 1 000 mm

Door-rail swing door

A full-glass door with a top and bottom rail that carry the pivots, the lock and the closer. The bottom rail can be 4 in., a low 2-5/16 in. profile or a 10 in. ADA height.

Typical use: Shop and office entrances with daily traffic, single or double doors.

Systems: CRL DRS 4 in. tapered and square rails · CRL 2-5/16 in. low-profile rail · CRL 10 in. ADA bottom rail · CRL Slender Profile 1-3/8 in. rail · TAG Door Rail System (DR4S / DRL4S) · closers: CRL 8160A overhead concealed, Jackson 20101, Jackson 900 and dormakaba BTS80 floor closers, CRL 8300 low-profile

Request a quote →
ELEVATIONPatch-fitted swing doorFIXEDFIXEDPATCH DETAILcorner patch, no railcloser in bottom patch3 000 mm opening2 400 mmPLAN VIEWLUX GLASS

Patch-fitted swing door

Small corner patch fittings top and bottom instead of a rail, with a patch lock. The hydraulic version hides the closer in the bottom patch, so there is no floor box.

Typical use: Office entrances and glass vestibules that want the least metal, including retrofit floors with no floor closer.

Systems: CRL PHA1 (North American) and PHE1 (European) patch kits · dormakaba PT10 bottom patch · CRL offset bottom patch · CRL AMR / EUR patch locks · CRL hydraulic patch door set (hold-open) · TAG TH8010 hydraulic patch fittings and OCC closer

Request a quote →
How it works

From the opening
to the finished wall.

  1. Site visit. We measure the opening and check the floor, the ceiling and what is above it.
  2. Pick the system. Sliding, telescopic, folding, stacking or a fixed front with a door, chosen for the width, the ceiling and how often the wall opens.
  3. Made to measure. Glass and hardware are made to the measured sizes.
  4. Install. We install, adjust every panel and door, and leave the site clean. Every system we install has a 5-year warranty on labour and 5-year warranty on hardware.

Typical proportions shown; every system is sized to the opening. Need glass railings or a frameless shower instead? See glass railings and frameless showers.

Ready to make it frameless?

Get a fixed, written quote from the owner -- no pressure, no call centre.

Get a free quote
Get a Quote
Call 416-897-0767 Free Quote
Call Lux Glass Text for Quote